Masonry Magazine October 2008 Page. 39
RJ-711 Seismic Anchor with WIRE-BOND® Clip
WIRE-BOND's RJ-711 veneer anchor with 3/16" adjustable tie is available with the WIRE-BOND Clip for use in seismic zones. Continuous straight-and-cut wire is installed in the clip which is embedded in the mortar joint. The tie is installed in the plate or eyelets fastened to the support structure. This adds stability and protects against thermal expansion and contraction and provides uniform distribution of lateral forces.
1-800-849-6722
www.WIREBOND.com
LOCKDOWN with CoreLock the Secured Rebar Positioner
(Pat pending)
Available for 8" and 12" block! We're shipping now!
• Corelock is "seated" 1.25" deep into core.
• Eliminates movement of positioner during block installation.
• Diagonal placement in core insures rebar is always automatically centered.
INNOVATION IN MASONRY CONSTRUCTION
HCL-711
WIRE-BOND'S HCL-711 Anchoring System installs quickly and easily on exterior walls with brick veneer while providing positive contact with metal stud and avoiding damage to wallboard. With the metal studs spaced at 16" intervals, the system provides a 16" squared grid. The "legs" of the HCL-711s provide the platform for the insulation Three pointed prongs pierce wallboard and abut to the steel stud.
1-800-849-6722
www.WIREBOND.com
Type III-X Anchor
WIRE-BOND'S Type III-X Anchor installs quickly and easily on exterior walls with brick veneer while providing positive contact with metal studs. It transfers compression loads to the steel stud backup. The Type III-X is available in 14 gauge and 12 gauge (plate). Finishes include mill galvanized, hot dip galvanized, and stainless steel. Prongs on the anchors are available in lengths to accommodate 1", 1-1/2, 2", and 2-1/2" insulation, as well as 1/2" and 5/8" wallboard.
1-800-849-6722
www.WIREBOND.com
SureTie
WIRE-BOND's SureTie" installs easily on steel stud/brick veneer applications. One-piece design provides superior strength. SureTie" has a #12-14 tapping thread 1" in length. Accommodates wallboard thicknesses of 1/2" and 5/8", and various sizes of insulation. Kaitex 1500 coating provides superior corrosion resistance. Triangular adjustable ties are 3/16" in diameter and are available in hot dipped and stainless steel finishes.
1-800-849-6722
www.WIREBOND.com