Masonry Magazine February 1982 Page. 52
You know the risk of not getting a masonry job clean enough to sell. It can tie-up your money - so why take a chance? If you have a lot of brick to clean, the mortar is hard and you are starting to worry about it, please call us. A Factory Representative will demonstrate on your job site and quote a price that you can afford.
Mason Contractors, Architects and Government Agencies have accepted this method of cleaning. A demonstration will show you how expensive and secret chemical formulas are not necessary. Plain, cheap Muriatic Acid can be used for most cleaning jobs, using hot water to activate the acid and extend the cleaning season in winter months. However, if special chemicals are specified, this machine can use them.
We sell direct from the Factory thru Factory Representatives who are expert in the mechanics of this machine and methods of cleaning. We train your operator, on the job site, to operate and maintain the machine. The design is simple and sturdy as possible for easy maintenance by the owner. A comprehensive Maintenance Manual is provided. Any machine brought into the Factory will be serviced upon request.
For service information and parts, call our Toll-Free 800 WATS #. We are only seconds away by phone. Parts are shipped by UPS the same day requested and are only hours away by air. Our parts inventory is large and complete.
Manufacturer warrants each machine to be free from defects in material, component parts, and workmanship for a period of 90 days.
Features
Features of our Machine conform with these objectives:
1. A quality production machine. Every component part is rated for 2150 psi or above.
2. A machine powerful enough to handle the largest and toughest cleaning job; one that will set on the ground and clean a building 20 stories high.
3. A machine compact and portable enough to perform a small cleaning job.
4. A machine that can handle other cleaning jobs not related to masonry walls.
5. A machine designed for safety to protect both the Operator and the Machine.
6. Combine all of these objectives into one model, the K-2150, with one price to all customers.
SPECIFICATIONS:
| Model | K-2150 |
| ----------------- | --------------------------------------- |
| Type | Chemical Induction Cleaner |
| Water Volume | 3 GPM |
| Output Pressure | 2150 PSI |
| Fuel Engine | Regular Gasoline |
| Burner | Kerosene or No. 1 Fuel Oil |
| Liquids Gasoline | 1.9 Gal. |
| Capacity Kerosene | 12 Gal. |
| Acid | 20 Gal. |
| Water | 7 Gal. |
| Hoses Acid | 1/4" acid and heat resistant hose |
| Water | %" wire braid 3000 psi at 250°- Length 100 Ft. |
| Boiler Insulated | Heavy-duty butt-weld 1½" pipe Pressure and thermal protected |
| Dry Machine | 900 lb. |
| Weight Trailer | 290 lb. |
| Dimensions Machine| 62" Long x 40" Wide x 27" High |
| Machine & Trailer | 102" Long x 58" Wide x 47" High |
| Engine | 10.5 HP Wisconsin Robin - Model EY44W-Counter-balanced |
| Air Compressor | 14 HP-Model 21 - Smith |
| Pump | Triplex Plunger Pump Giant Model PB-41 |
| Burner | Nu-Way-Model FR-2 GPH |
| Trailer | Spring Axel - Over the road high speed design |