Masonry Magazine February 2010 Page. 9
TOTALFLASH™ If You Ever Find An "Or Equal," Let Us Know.
CAVITY-WALL DRAINAGE SYSTEM
by Mortar Net USA, Ltd.
Far More Moisture-Control Than Usual.*
5-1/2 ft. Panels of PRE-CUT FLEXIBLE FLASHING
All main components are factory-assembled onto easy-to-mount flashing panels.
Built-In NO-CLOG DRAINAGE MATTE
lets water pass, unobstructed to Weep Tabs.
Built-In TERMINATION BARS
with pre-drilled holes, allow quick, one-man installation.
PreFormed Corner Boots, Stainless Steel Corners & End Dams are available, for perfect corners every time
Built-In EDGE DAM
directs moisture out of building.
All Screws & Adhesive Tubes included in each box of TOTALFLASH™
Built-In NO-CLOG WEEP TABS
deliver moisture to the outside of the building.
Built-In STAINLESS STEEL DRIP EDGE
releases moisture away from building.
Clearly Specified LAP JOINTS
enforce complete secure coverage.
Standard height is 18"; 12, 15", and custom heights and configurations are available for restoration work, windows, doors, etc. Uses 40-mil polymeric, reinforced, UV stable flashing membrane, incorporating DuPont's Elvaloy" KEE polymer.
Every modern moisture-control element has been built right into each lightweight, easy-to-use panel of pre-cut, 40-mil flashing, so everything you need arrives in one order. You just open the carton and start installing total protection! (Available in sizes for restoration, renovation, or remediation, too.)
*Half (Or Less) Your Usual Time & Labor Costs.
ONE Mason Can Install TOTALFLASH In 1/3RD THE TIME It Takes For TWO Masons To Install Ordinary Flashing Elements!
That's right--one-third the time, meaning one-third the labor costs! See for yourself: Go to www.MortarNet.com and watch the exciting "TOTALFLASH CHALLENGE" competition, held at 2008's World of Concrete convention.
It's TOTAL protection, installed in a FLASH!
Sweets ARCAT
Visit us at the WOC Show Booth #S12320
800-664-6638
MortarNet.com
READER SERVICE #138
TOTALFLASH™
CAVITY-WALL DRAINAGE SYSTEM
by Mortar Net USA, Ltd.