Anchored Masonry Veneers

Words: Stephen GetzConstruction of the veneer on a brick veneer cavity wall relies on quality products and tradesmen to fulfill the design life and functional expectations of the owner and its occupants.

As part of the building's veneer design criteria, the brick tie anchoring system should be carefully evaluated and reviewed with consideration to the following:
  • Tie stiffness

  • Tie strength

  • Tie spacing

  • Fastener requirements

  • Air barrier interface

  • Material type and finish

  • Tie versatility
Construction of brick cavity walls tied to back-up materials other then masonry relies on a relatively stiff brick tie anchoring system for an optimum performing façade. The result minimizes excessive veneer deflection under wind load, which creates less potential for cracking of the veneer. Less cracking means less water migration into the cavity.

A tie illustrating good strength performance characteristics accommodates placement spacing greater than a typical 16- X 16-inch pattern as used with conventional plate and pintle ties, and increases the spacing area to 16 X 24 inches. This generous spacing would remain compliant with standard veneer wall construction requirements of the ACI 530/ASCE 5/TMS 402 criteria. It's important to note that when applying the greater spacing, the quantity of ties required is reduced by almost one-third, which generates a significant cost savings to the owner without compromise to the veneer's performance.

One must also consider a compatible fastener for the connection of the tie assembly to the stud-framing backup. A suitably designed brick anchoring system that utilizes a single fastener for its backup connection will provide a cost-effective installation and lessen the quantity of breaches in the air barrier by 50 percent over conventional ties. A quality Tek screw for steel stud or lag screw for timber connections is efficiently installed and available in material compatible to the anchor plate material.

Finally, the use of insulation in brick veneer cavity wall construction is a popular means to conserve building energy. A tie system must be adaptable for various wall configurations and accommodate insulation of varying thicknesses.

CTP Inc., for example, provides wall ties and anchors that illustrate tie stiffness three times that of conventional ties in the marketplace. The base plate can utilize a single screw fastener for 16-gauge metal stud and timber connections and is manufactured in sizes to bridge various insulation thicknesses. Spacing of the ties is recognized at the maximum permissible by code. The complete assembly is available in hot-dip galvanized or stainless steel finishes. The tie system also utilizes a proprietary multi-functional V-shaped tie that can be used for standard brick veneer construction, or be utilized with reinforcement for seismic applications. The installation is efficient and notably strong.
About: Featured
 0
2024 Architectural Awards: Excellence In Masonry Winners

The Masonry Advisory Council held the 2024 Excellence in Masonry Awards on Saturday, October 26th at 167 Green St., Chicago, Illinois. Honoring 80 projects from over the Chicagoland and Northwest Indiana Area. The Awards program celebrates outstanding ar

By: Ashley Kelly
Read More
NSI and ISFA Announce Silica Exposure Literature Review

NSI and ISFA are proud to present a literature review that summarizes the growing library of studies related to respirable crystalline silica (RCS) exposure. Completed by Yale Occupational and Environmental Medicine, the study covers 34 publications and d

By: Amy Oakley
Read More
La Maison Franchère: How Masonry Turns Functional Buildings Into Timeless Beauty

La Maison Franchère, or the Franchers’ House, stands as a notable relic of stone architecture in Saint-Mathies, a small Quebec town on the edge of the Richelieu River. Unlike the neighboring homes, this towering, two-and-a-half-story mansion immediately c

By: Vera Autushka
Read More
MASONRY STRONG Podcast Episode 5 Recap: Zach Everett

Welcome back to another insightful episode of the Masonry Strong podcast! Today, we have a very special guest, Zach Everett, sharing his journey and experiences in the world of safety within the masonry industry. From humble beginnings to becoming a vital

By: Justin Stengel
About: Featured
Read More