Polyether-Based Sealants and Adhesives Offer Performance, Safety and Low VOCs

Words: Dan Kamys/Public/News/20110705111000-1.jpg" width="600" height="338" border="0" alt="NovaLink is a moisture curing, polyether sealant designed for application in damp, dry or cold climates." />
NovaLink is a moisture curing, polyether sealant designed for application in damp, dry or cold climates.
Polyether-based sealants and adhesives, the advanced formulation polymers that have overtaken urethane and silicone products in Japan and Europe, are now becoming the new standard among some U.S. architects and contractors for use throughout the entire building envelope from foundation to roof.

Since being designated by the Adhesive Sealant Council as a unique product category last year, the use of polyether-based sealants has nearly doubled for both new construction and repair work. The driving forces behind this increased popularity are the superior performance and environmental compliance characteristics of polyether based sealants and adhesives, compared with many urethane- and silicone-type products.

Another important factor: Because these advanced sealants and adhesives contain no solvents, they produce few Volatile Organic Compounds (VOC). This is not only an environmental benefit, but also it makes polyether-based products compliant with increasingly stringent local and state VOC regulations.

VOCs are substances that evaporate into the atmosphere, contributing to climate change, chronic respiratory disorders and cancer. Many sealants that produce VOCs are also flammable, produce irritating odors and tend to degrade over time.

Rewriting the Book

Once a polyether-based sealant or adhesive is applied, it reacts with moisture in the air and cross-links to form a tough, long lasting, flexible chain. It cures rapidly, adheres to a wide range of materials, meets the toughest standards for joint movement, won’t shrink and won’t suntan.

Chem Link Advanced Architectural Products in Schoolcraft, Mich., has developed and popularized the use of polyether compounds throughout the United States, and the developed of a variety of products that address assorted adhesive and sealant requirements throughout the building envelope.

No More Shrinkage

Polyether-based adhesives and sealants are cured by water it draws from the air, so there are no solvents to evaporate and cause shrinkage. Because these products cure from the top down and the bottom up, they are watertight and fairly durable within 10-20 minutes, though they typically take two to three weeks to completely cure when, as Graham notes, they become hard as a hockey puck but remain “remarkably” flexible.

The Power of Green

Although the polyether adhesives and sealants were initially popular because of superior performance properties, its no-solvent chemistry has added to sales more recently. In using these products, contractors don’t have to worry about confined spaces, flammability or that they will contaminate some other material.

For more information, visit www.chemlinkinc.com.
About: Featured
 0
STABILA Tools: Engineered for Professionals Worldwide
June 2025

With a history spanning over 100 years, STABILA has firmly established itself as a trusted name in precision and durability. Known for crafting tools that stand the test of time, STABILA has become the standard for long-lasting performance. Today, the bra

Elsa Bueno
Featured MAP Partner
Read More
Check out CrewTracks' Latest Innovations
June 2025

In today's masonry industry, the right tools are essential for efficient operations. At CrewTracks, we're constantly innovating to provide masonry contractors with the solutions they need to thrive. We're excited to offer a sneak peek at some of our newes

Erin Laird
Featured MAP Partner
Read More
The Importance of Durable Safety Footwear on Masonry Jobsites
June 2025

Masonry work is a rewarding trade that relies on precision, strength, and skill. However, it also comes with its share of risks. From handling heavy materials like bricks and concrete blocks to navigating rough, uneven surfaces, masonry jobsites present n

Andrew Moffatt
Featured MAP Partner
Read More
OSHA’s Proposed Heat Stress Standard
June 2025

The goal of OSHA is to work tirelessly to keep us, the workers, as safe as possible as we go about our jobs every day. According to the statistics that the Bureau of Labor Statistics provides, a staggering 479 workers died from heat stress from 2011-202

Justus Everett
Featured
Read More