Masonry Magazine August 1997 Page. 35
PRODUCT UPDATE
Tilt Mixer
The RexCon division of Rose Industries has introduced a new tilt mixer spiral blade configuration that offers significant performance benefits. According to the company, the new design cuts mixing time, energy consumption and blade and drum wear by as much as 50%. The unique new blade arrangement within the mixer adds additional blade segments. The computer generated counter-flow blade pattern provides superior slump and air content control and improves both mixing speed and uniformity. The new mixer is ideally suited for both high and low slump mix lesizers. It also incorporates a pressure compensated hydraulic system that provides high speed discharge a 15 second, cycle time -- as well as variable speed and emergency discharge capability. RexCon has applied for a patent on the new design, which will be available for 10 and 15 yard tilt mixers. The new counter current blade components are offered as an option on new mixers, or, can be retrofitted in existing RexCon mixers. RexCon is a full line supplier of concrete paving plants, paving equipment and related products.
Masonry Sealer
OKON PLUGGER, a heavy duty, water based, high solids, water repellent sealer, was designed for use on all concrete block and other very porous masonry and stucco surfaces, specifically for solving high porosity substrate problems. OKON PLUGGER's special blend of acrylic/elastomeric type resins help fill and plug pores and capillaries in the substrate without producing a heavy sealed or coated appearance. It produces an excellent water sheding/water repellent treatment in one or two flood coat applications. Application is quick and easy with low pressure airless spray equipment. On low density, high porosity, lightweight block, two applications are required. When dry to the touch, OKON PLUGGER is clear and colorless and can be used as a top coat over previously painted surfaces. OKON PLUGGER can also be used as a semi-transparent stain by mixing with 100% latex paint to produce a coating for very porous CMU or other porous masonry or stucco substrates. It provides for easy clean up with soap and water. Fully cured resins can be removed with xylene, toluene or methylene. For information contact: Jennifer Nellis, OKON, INC. (303) 232-3571
Lasermeter
The design and construction of the new DISTO basic hand-held lasermeter made use of the latest laser technology for fast non-contact distance measurement. At the touch of a button, a visible red laser beam lets the user aim the instrument precisely at any point on the object. Tile DISTO basic takes only seconds to measure any distance from 30 cm (11 in) to 30 m (98 ft). Use the target supplied with the instrument to measure distance up to 100 m (328 ft). See where you're measuring to, spot-on! That's a clear advantage over the ultrasound technique. Determine distance instantly, reliably, unequivocally, with millimeter accuracy, to objects such as walls, ceilings, pipework, drains, columns and sloping surfaces. Additionally, the 90° swivel foot ensures accurate measurements perpendicular to the Supporting surface. The DISTO basic can store up to ten mcasurements for the instant calcullation of area and volume.
Power Cutter
Partner Industrial Products introduces the next generation of cut-off saws the K650 and K700 ACTIVE Series. These new machines feature innovative refinements which continue to reduce maintenance costs and downtime while providing superior performance. The saws feature the new DuraStarter TM. Testing has shown the new starter lasts three to five times longer than a standard starter. This new enclosed starter mechanism is dust protected for added life. Additionally, a series of seals dramatically reduces the amount of concrete dust which penetrates the unit causing the starter to seize up. SmartCarbTM maintains the proper fuel/air ratio so the saw can run at full power longer. Together with Active Air Filtration, the carburetor helps extend filter life by five times or more. The carburetor is fully integrated resulting in a heavy duty design without hoses or exposed parts which can become loose and create problems. To find out more about Partner's complete line, contact your local Partner dealer, or call or write to: Partner Industrial Products, 905 W. Irving Park Road, Itasca, IL 60143, 800-323-3553.
New Models
JCB has replaced its entire Loadall line. The nine new telescopic handlers are four-wheel drive, four wheel steer units designed for increased versatility and productivity in a variety of "lift and place" and "tool-carrying functions. Seven Loadall tool carriers feature an especially low boom configuration, resulting in significantly improved visibility to the right and rear of the machine. The new layout also increases strength, meaning high productivity is achieved with buckets, forks or various attachments. Standard auxiliary hydraulics, with the option of additional auxiliary services, allow for the use of a wide selection of powered attachments such as sweepers and grabs. JCB's two new "lift and place" units offer excellent all-around visibility and frame leveling capabilities, as well as rapid boom cycle times, good lift capacity on tires, and excellent power-to-weight ratios. These factors, along with easy, ground-level access to all daily service checkpoints, make both units ideal for masons, framers and the rental market. For more information on JCB equipment, or to contact your local dealer, call 1-888-PICK-JCB.
Block Saw
Stone Construction Equipment, Inc. announces the introduction of an all new line of masonry block saws-- The new line consists of a lightweight, portable block saw - the MS 1 and an extra rugged, heavy-duty professional block saw the MS2. The two models are offered with a variety of engine and blade guard options. Stone Saw Devil Masonry Block Saws all steel frames, sealed bearings and stationary engine platforms stand up to the most complicated block cutting. The compact Saw Devil MS 1 can be used on a table, truck bed, or anywhere on the job with its optional leg kit. It cuts blocks to 5" depths with a 14" blade capacity. Head, bed and optional stand easily separate into sections.
Wall Saw Blade
Cushion Cut will introduce to the market its Lightning Speed wall saw blade series- the fastest available. Available in six different diameter sizes, including 34 and 36 inch, the LS series is sandwich segmented for increased speed and longer blade life. These blades are 30 to 50 percent faster than Cushion Cut's standard wall saw blades. Also, they are more stable with thicker cores and will be available in five bonds. The LS is also available in .235 segment thickness, ideal for use with chain saws for corner cuts. These blades are compatible with all Cushion Cut 360 wall saw series, including the new 360-2100. For more information, contact: Isabel Junco Neims, Phone: 310-325-5702 Fax: 310-539-2098.