2015 Masonry Industry Legislative Conference recap

Words: Jeff Buczkiewicz, Mark Kemp, John Topp, Lisa Prichard, Colleen Sutter, Mike Sutter, Tim Walberg, Reid Ribble, Mark Kirk, Kyrsten Sinema, Joe ManchinWhat another great week in Washington, D.C. for the Mason Contractors Association of America’s (MCAA) annual Masonry Industry Legislative Conference. We made the most of our time, both on and off of Capitol Hill, and had yet another successful effort. We had representatives from states throughout the country who took the time to meet with Representatives and Senators from their home states and I wanted to take this time to give you a brief recap of our efforts.

The MCAA had four main issues that we discussed this year during every visit and tried to hit home the numerous ways that federal laws and regulations impact the mason contracting industry. Our top legislative effort was once again asking Representatives and Senators to cosponsor the Concrete Masonry Products, Research, Education, and Promotion Act (introduced by Rep. Brett Guthrie (R-KY) and Rep. Kathy Castor (D-FL)), which as you know would provide the legal authority for the concrete block industry to hold a referendum vote on setting up a “check-off” program for the industry. Our efforts on this front had an immediate impact as Members of Congress from both sides of the aisle officially signed onto the legislation before the MCAA even left town. Follow-up efforts continue for our members and we are confident that we will continue to add even more cosponsors in the weeks ahead. While this was by far our top legislative issue, it was by no stretch our only legislative ask. Seeing as broad based immigration reform continues to be a lingering issue on Capitol Hill, and has the potential to once again rise to the surface during the Presidential campaigns, we thought it to be prudent to remind Members of Congress that the MCAA is fully supportive of a guest worker program for the construction industry and strong liability protections for employers should the federal government expand or mandate the use of a “E-Verify” system during the hiring process. Members of Congress were very supportive of these requests and many vowed to keep this and the misclassification of employees as independent contractors on their radar screens as the legislative process rolls forward.

Mark Kemp, Jeff Buczkiewicz, Lisa Prichard, Mike Sutter, and Colleen Sutter discuss issues affecting the masonry industry with Representative Kyrsten Sinema (D-AZ)
Mark Kemp, Jeff Buczkiewicz, Lisa Prichard, Mike Sutter, and Colleen Sutter discuss issues affecting the masonry industry with Representative Kyrsten Sinema (D-AZ)
Continuing efforts we have been making for over two years, our other top priority was our unending commitment to showing Members of Congress and the federal government the true impact that the Occupational Safety and Health Administration’s (OSHA) proposed new rule on workplace exposure to crystalline silica would have on the mason contracting industry and the construction industry as a whole. We reminded everyone we met with that workplace safety and health remain our top priority and we are fully committed to meeting the current standards as set by OSHA; however we do believe that OSHA has not made a case for the need for the new rules, has not accurately taken into account the actual feasibility of complying with the new standards, and has drastically underestimated the true cost to the construction industry in implementing this rule. The feedback we received from Members of Congress on this topic was encouraging and we look forward to continuing to work with Members of Congress on both sides of the aisle to ensure that OSHA takes another look at this rule before rashly implementing it.

John Topp, Mark Kemp, and Jeff Buczkiewicz present the MCAA Freedom and Prosperity Award to Representative Tim Walberg (R-MI)
John Topp, Mark Kemp, and Jeff Buczkiewicz present the MCAA Freedom and Prosperity Award to Representative Tim Walberg (R-MI)
While we were on Capitol Hill, President Mark Kemp, Executive Director Jeff Buczkiewicz, and various members of MCAA took the time to present our annual “MCAA Freedom and Prosperity Award” to four Members of Congress who have been adamant supporters of small businesses and our industry as a whole. This year’s award recipients were:
  • Representative Tim Walberg (R-MI)
  • Representative Kyrsten Sinema (D-AZ)
  • Senator Mark Kirk (R-IL)
  • Senator Joe Manchin (D-WV)
Attendees of the South of 40 Conference received a tour of the U.S. Capitol with Representative Reid Ribble (R-WI)
Attendees of the South of 40 Conference received a tour of the U.S. Capitol with Representative Reid Ribble (R-WI)
While we had a hard and long couple of days hitting Capitol Hill, we also had opportunities to participate in some rather fun events as well. During the beginning of the week, members of our South of 40 Committee and MCAA leadership were able to take two amazing tours of Washington, D.C. landmarks. First on the schedule was a behind the scenes masonry tour of the Library of Congress. When not being slyly shamed for looking at our phones by our gregarious tour guide, we were learning quite a few fun, historical facts about the Library and its contents. The second tour has become almost legendary within the MCAA, and once again Representative Reid Ribble (R-WI) was kind enough to take our group on a once in a lifetime tour of the U.S. Capitol building. These two tours were not only extremely informative, but they served as a great way for our group to get our feet wet on Capitol Hill and learn our ways through the Halls of Congress.

We appreciate all of the MCAA members who took the time out of their busy schedules to join us in Washington, D.C. to advocate for our industry. We cannot overstate the importance of this week and the impact it has on our industry as whole.

Keep an eye out for information regarding our 2016 Masonry Industry Legislative Conference. We hope to see you there!
Masonry Mortar: The Right Type for the Job
May 2025

When it comes to masonry construction, mortar is much more than “glue” that holds everything together — it’s a critical component of wall performance, longevity, and aesthetics. It can “make it or break it”. Whether you’re laying a foundation CMU wall or

MASONRY STRONG Podcast, Episode 20 Recap: Mark Kemp, Superior Masonry
May 2025

How It’s Made: Clay Thin Brick
May 2025

Clay thin brick is a versatile alternative to traditional full brick. It comes in numerous colors and styles and offers something for every design preference. Thanks to the lighter weight, it is designed to reach spaces full brick cannot. From floors to c

Bonding with Masonry 2025: Q1
May 2025

This issue’s questions come from an Architect and a Mason Contractor. What questions do you have? Send them to info@masonrymagazine.com, attention Technical Talk. Q. An Architect asks how to create a narrow masonry pier between openings. Is there a min