Masonry Magazine December 2005 Page. 8

Words: Joel Guth, Jeb Hensarling, Brad Kirkpatrick, Michael Adams, John Dolce
Masonry Magazine December 2005 Page. 8

Masonry Magazine December 2005 Page. 8
President's Message

G. Alan Griffin
President. Mason Contractors Association
of America

Silica Task Force Update

As you are probably aware, MCAA has been heading up the Construction Industry Silica Task Force for the last two years, as well as collecting data and drafting a task-based proposal to limit employee exposures to respirable crystalline silica. While we believe our task force document is very sound, additional data collection remains to be completed. To that end, MCAA's director of government affairs, Marian Marshall, has had numerous discussions with the National Institute for Occupational Safety and Health (NIOSH) about collaborating with them on future data collection efforts and research.

This task-based approach is not only the most effective means, both technologically and economically, for achieving our goals, but it is also the approach supported by NIOSH. Having this additional support may be critical in convincing OSHA that the Silica Task Force's findings should be the basis for any future silica standard that the agency develops.

And, concerning the OSHA standard, readers should be aware that OSHA published its semi-annual regulatory agenda on Oct. 31, and it is moving forward with a proposed rule on silica. OSHA also mentions proposals by the Building Trades division of AFL-CIO, as well as the American Society for Testing and Materials (ASTM). Both proposals contain requirements for exposure monitoring and medical surveillance, which would be cost-prohibitive for the industry, to say the very least.

The ASTM proposal is particularly problematic because they are developed as "national consensus" standards and, under the law, OSHA is required to adopt the provisions of "national consensus" standards or indicate why the approach the agency is taking is more effective.

The next integral part of this whole puzzle is the OSHA risk assessment. The risk assessment is the barometer, if you will, for what the agency will ultimately decide to propose as a comprehensive standard for addressing workplace exposures to respirable crystalline silica. The risk assessment is simply this a group of scientific studies that have been reviewed by OSHA and are found to contain significant evidence that the health effects of silica warrant further review. It is expected that this risk assessment process will be completed in April 2006. For the very first time, OSHA will release this risk assessment for public comment. Once published, the Silica Task Force will undertake an in-depth, critical analysis of this document and determine whether or not adjustments in our task force document may be necessary.

In the meantime, we have a lot of work to do, but at this stage of the game - all the pieces seem to be coming together very well. We are dedicated and on course to present an excellent set of recommendations to OSHA for limiting occupational exposures to respirable crystalline silica on construction job sites.

This is an enormous undertaking, but one that will prove the most effective in protecting the health of our workers while also preserving the integrity of our industry.

Finally, many thanks to Marshall and Mark Kemp, MCAA member and chairman of the Silica Task Force, for their hard work and dedication on this issue.

MCAA

New Members

The Mason Contractors Association of America is proud to welcome the following new members to the Association. MCAA would like to take this opportunity to thank them for joining their fellow mason contractors nationwide in helping to build a stronger masonry industry. MCAA's members look forward to a long affiliation with their firms.

Gateway Waterproofing & Restoration
10069 Lakeside Drive
St. Louis, Missouri
Volume Classification: A

Grande Masonry
780 Allens Ave.
Providence, Rhode Island
Volume Classification: D

Molter Corporation
P.O. Box 751
Frankfort, Illinois
Volume Classification: A

If your company is interested in becoming a member of the Mason Contractors Association of America as a contractor, supplier or instructor, please contact MCAA's Director of Membership, Melissa Polivka, at 800-536-2225, or complete an application at www.masoncontractors.org.

www.masoncontractors.org


Ensuring Stability and Safety in Masonry Projects: Hog Leg, Hog Guard, and Hog Support
April 2025

As seasonal changes bring high winds and fluctuating temperatures, masonry projects face unique challenges. These conditions can stress vertical structures, requiring reliable bracing, while temperature swings may lead to a need for masonry restoration. A

What gives with head protection? Why workers want to keep their hard hats and ditch safety helmets.
April 2025

Last August, I took my pickup to the dealership for a nagging check engine light. While it was being looked over, I chatted with the salesman I normally deal with, and he told me about the latest and greatest 2025 models. He told me how the twin turbo inl

Government Affairs: Bringing North Carolina to Washington, D.C. and Hopefully Young People to Your Jobsites
April 2025

For you long time members of the Mason Contractors Association of America you likely remember our Annual Washington, D.C. Fly-In where MCAA members from around the country would come to Washington, D.C. meeting with Members of Congress from their home sta

Chairman's Message: While We Are Still Here
April 2025

I truly value my days working on construction sites during the summers of my high school and college days. Some moments in our youth are so clearly meaningful that we file them away in our subconscious to be recalled when life events require inspiration.