Masonry Magazine January 2012 Page. 21
By Jan Boyer
Cast Stone Institute
Educational Opportunities
The Cast Stone Institute recognizes that, because cast stone is not included at any time in the training of specifiers or masons, confusion about the product's properties as well as the appropriate construction practices exists. True to its mission to improve the quality of cast stone and disseminate information regarding its use, the Institute provides information about technical aspects of the product and has produced seminars to train on the Architectural Design with Cast Stone properties and best practices for placing cast stone to ensure long, durable life on the building. Institute technical specifications, bulletins, details and related materials are included individually and in the Cast Stone Institute Technical Manual available for free download at www.caststone.org
The following seminars are available through the Institute to train mason contractors and architects on best practices:
# Architectural Design with Cast Stone
In this general information seminar, attendees will learn how Cast Stone is made, how it differs from related precast and natural stone materials, and the testing requirements for cast stone as per ASTM that include a freeze-thaw requirement. The applications, design recommendations and appropriate specification of Cast Stone for architectural applications will be discussed. Do's and don'ts for appropriate design and placement of the stone are reviewed. The sustainable attributes of Cast Stone related to LEED and green building also will be discussed.
# Cast Stone Connections
In this detailed seminar, the common terminology, design and installation techniques for interior and exterior architectural applications and anchoring for veneer applications of Cast Stone will be taught. Attendees will understand the common interior veneer installation methods, guidelines for stacked or relief supported cast stone veneer, rebated anchors, mechanical cladding systems, appropriate wall ties, back anchors, kerfs, shims, mortar joints, sealant joints and caulking options. Additionally, industry codes and regulations as they relate to proper cast stone details and setting will be reviewed.
# Website Handling and Installation
This seminar is geared specifically toward mason contractors and field supervisors to address field practices for the proper handling of architectural cast stone. It addresses shop drawings, sample approvals, shipment and on-site storage, tolerances, cold-weather setting practices, flashing, weep holes, sealant joints, protection after setting and touch up.
These seminars are available for presentation to local, regional or national mason groups. Contact the Cast Stone Institute office to arrange for a CSI Certified Producer Member to make the presentation.
All Certified CSI Producer Members must pass a rigorous certification that checks for outstanding quality control, safety procedures, consistency of product, meticulous record keeping and other processes involved in the production of high-quality cast stone elements. In addition, members must provide testing of product every 500 cubic feet for compression and absorption, as well as independent laboratory test results every six months to confirm the product meets the Institute standard specification and ASTM C1364. Producer Members also must have a current compliant Freeze Thaw test. This required testing assures the Producer Member, the specifier and the owner that the cast stone is being produced to specifications. Without this testing, quality cast stone production cannot be assured.
Producer Members also must undergo the recertification process every two years by unannounced plant inspections performed by an independent engineering firm, in order to assure compliance to requirements. The Institute certification differs from others, in that they certify that not only the processes are in place to make quality product, but also that the product itself is meeting specifications. They each provide a 10-year Limited Product Warranty for the cast stone they supply on projects.
Jan Boyer is executive director of the Cast Stone Institute. For more information, visit www.caststone.org, call 717-274-3744, or email staff@caststone.org.
MASONRY COMPUTER ESTIMATING
TRADESMEN'S SOFTWARE, Inc.
FOS3DE
ON SCREEN 3D ESTIMATOR
Masonry Computer Estimating
That Does It All ... in 3D!
New for 2011! Utilize Tradesmen's 3D masonry take-off for BIM models.
Just point and click on the digital blueprint and see your walls displayed. Our On Screen 3D Estimator makes it simple and fast.
Runs on Windows PCs and Bootcamp/Windows on Intel Macs.
Support available 7 days a week.
See the actual building being displayed in 3D as you do your take-off in either PLAN mode, PERSPECTIVE mode, OUTSIDE mode, INSIDE mode or at any ELEVATION.
Complete your take-off, then walk through or around and see the actual finished building(s).
Calculates CMU: HALF and FULL BULLNOSE, DOUBLE BULLNOSE, CHAMFER, or SASH for any or all OPENINGS, JAMBS, CORNERS, CONTROL JOINTS and any SPECIAL CUTS.
Integrate with Accounting Software and transfer data to Microsoft Excel.
30 day money-back guarantee.
Negotiating projects with a 3D image will win you more contracts and enhance your professional image.
TRADESMEN'S SOFTWARE, Inc.
1-800-494-4899
See for yourself at:
www.tradesmens.com
SEE US AT THE WORLD OF CONCRETE BOOTH N-1447