Roles

Mason Contractor News...

NCMA Adopts New Logo
The National Concrete Masonry Association at its Midyear meeting adopted a new, contemporary logo to represent the association. The new logo goes into effect immediately and will be used on NCMA

Canadian MCA Elects Board of Directors for 1985
Pictured seated (from left) are: Bill Young, past president, Fredericton: Dino Maniago, past president. Vancouver, Bill Wilson.
3rd vice president, Ottawa: Kurt Bakgaard, 2nd vice president, Richmo

1982-83 Board of Directors, Canadian Masonry Contractors Association

Sitting, 1st row (from left): Ken G. Banks, Associate Members' rep, Blok-Lok Ltd., Weston, Ont.; Gunter Yost, 3rd v.p., Gunner Masonry Ltd., Calgary, Alta.; Rudy Frahm, 1st v.p

Posing for their group portrait at the 12th Annual Conference of the Canadian Masonry Contractors Association in Ottawa, May 9-12, 1979 are the association's 1979/80 board of directors. Standing (from left) are: regional vp's J. Deutsch, Ontari

Pictorial Highlights From the IMI Promotion Meeting

1-John Heslip, Masonry Institute of Michigan: Emerick Zitelli, Masonry Institute of Western Pennsylvania: Paul Lenchuk, National Concrete Masonry Association; Paul Rosensteel, Masonry Industry

Masonry Training in Ontario

George Brown College of Applied Arts and Technology in Toronto was the site for the course; the college helped "sell" Canada Manpower on underwriting the project, and provided facilities and personnel. Additional cour

Loadbearing Gains Strength in Canada

Place in North Halifax. It will feature over 1,000 units of both low and high-rise, essentially in engineered load-bearing masonry.

With the loadbearing masonry wall system, the builder was able to c

Successful CMCA Estimating Course
The estimating seminar sponsored by the Colorado Mason Contractors Association in Denver was reportedly every bit as successful as anticipated. Eighty-four students, mainly mason contractors and their estimators, att

Canadians Honor Eugene George

Craftsmen's Skill Leads to Awards
Stone paving, worn from a hundred years of traffic and skillfully laid by BM&PIU masonry craftsmen as the visible, outer "skin" of an Albany (N.Y.) riverfront building, is chan

Canadian Masonry Contractors Elect Board Members
The 1973 Board of Directors of the Canadian Masonry Contractors Association. (Front row, left to right) Eugene George, Kitchener, Ont., immediate past-president; R.E. Beaupre, Vancouver, B.C., 1st vice

Bricklayers' Union Re-elects Murphy and Joyce
The 31st biennial and 72nd annual convention of the Bricklayers, Masons & Plasterers International Union of America was staged in Las Vegas, Nev., at Caesar's Palace, September 11-15.

Thomas F.

CMCA's 1972 Board of Directors (left to right, standing): Ron H. Welch, regional vice president: Marcel Croteau, director at large; G. L. Vallee, William J. Young, Robert J. Hillis, Alfred P. Barbini and Gunnar Hagblom, all regional vice presidents; Robe

Pictured are the 1971 officials of CMCA. Seated, from the left: Robert E. Beaupre, 2nd vice president; Peter L. Martini, treasurer; Frank Camisso, 1st vice president; Elizabeth H. Bertolin, executive secretary; Eugene B. George, past president,

MCAA Executive Board Meeting Highlights

The Canadian hospitality was wonderful. Eugene George and Paul Vallee did an excellent job. The many courtesies extended to the board members were greatly appreciated. All of us send our sincerest thanks.

Executive of the Canadian Masonry Contractors Association elected at the Annual Meeting in Edmonton, left to right Frank Camisso, Downsview, 2nd Vice President, Eugene George, Kitchener, President: Harry Morstead, Calgary, Ist Vice President and Peter Ma

Newly elected officers at the founding convention, Canadian Masonry Contractors Association

Newly elected officers at the founding convention, Canadian Masonry Contractors Association, are (1. to r.): Edward Sirney, Burnaby, B.C., Pacific region